Home | Email Us | FAQ's




Main Site Menu

Products
Accelerating Admixtures
Air Entraining Admixtures
Corrosion Inhibiting Admixtures
Form Release Agents
Hydration Stabilizing Admixtures
Masonry Admixtures
Mid-Range Water Reducing Admixtures

FinishEase-NC
Flow Set 2000 NC

Pipe and Dry Cast Admixtures
Retarding Admixtures
Shrinkage Compensating Admixtures
Silica Fume
Super Plasticizing Admixtures
Surface Products
Underwater Placement Admixtures
Viscosity Modifying Admixtures
Water Reducing Admixtures
Company Info
About RussTech
Customer Support
Contact Us
Our Location
RussTechnical Notes
Admixture Technical Notes
Concrete and Product Technical Notes

© Copyright 2003
RussTech, Inc.

Home: Mid-Range Water Reducing Admixtures: Flow Set 2000 NC:

Flow Set 2000 NC

FLOW SET 2000 NC is a non-chloride, mid range water-reducing admixture for concrete. It is designed to facilitate the placing and finishing of concrete while providing control over the set time. FLOW SET 2000 NC is especially beneficial in mixes containing fly ash and or ground granulated blast-furnace slag (GGBFS).

ADVANTAGES:

* Improves quality of concrete by decreasing water-cement ratio

* Increases compressive and flexural strengths

* Levels of fly ash and GGBFS can be increased in concrete mixtures

* Reduces water content needed for a given workability

* Reduces cracking and shrinkage

* Reduces surface bleeding

* Reduces segregation

* Provides superior finishability on all flatwork and pre-cast surfaces

* Improves pumpability and workability of concrete even in mixtures with low contents of cementitious material

* Maintains slump life during extended mixing times

* Provides variable control of setting time-based on dosage rate

* Improved performance over a wide range of cements, fly ashes, silica fumes, GGBFS, and a variety of different mix combinations

TECHNICAL DATA SHEET

MSDS






© Copyright 2003 RussTech, Inc. All Rights Reserved.
Site Created BY Emaintainer