What is Cure & Seal?
Cure & Seals take the properties of both curing compounds and membrane forming sealers and combines them to yield the best performance properties of both. Where normal curing resins last only weeks before they wear off, some Cure & Seals will last up to to 5 years, depending on which product is applied. When applied correctly, Cure & Seals form a hard, shiny and durable surface that resists all waterborne contaminants and protects the concrete through its infancy and early life.
Concrete curing is the satisfactory maintenance of adequate moisture around and in newly placed concrete. Curing compound, applied immediately following placement, allows concrete to develop the necessary desired strength and durability. Concrete exposed to the elements is especially sensitive to improper curing because the strength development can be significantly reduced from excessive surface evaporation and exposure to freezing.
Concrete sealers are used on concrete to close up the pores in the concrete surface so it will resist water, de-icing salts, and other aggressive chemicals. Sealers are often used to prevent soiling, resist staining, facilitate the ease of cleaning, brighten concrete colors and exposed aggregates, and produce a water resistant surface. Sealers may also be used to dustproof concrete surfaces. Superior quality sealers usually consist of pure forms of acrylic resin that are non-styrenated and non-yellowing. Quality concrete sealers will last three to five years and require minimal maintenance.
STAMPSEAL 30X is a low VOC 30% solids acrylic solvent-based, non-styrenated formulation for sealing and curing concrete. It is a pure acrylic specifically formulated for sealing and protecting stamped, plain, exposed, colored, and precast concrete. It also works on cementitious overlayments.
STAMPSEAL 30X is a clear sealer that contains unique resins and solvent formulations compliant with local VOC regulations designed to provide maximum penetration into the concrete, it makes colors brighter, surfaces more glossy and reduces fading (resulting from weather exposure) of decorative concrete surfaces while creating a hard and long lasting protective barrier over the concrete surface. It is non-yellowing and resistant to oil, grease, acid, de-icing salts, UV rays, wet and dry abrasion, and most household chemicals.
STAMPSEAL 30 is a ready to use product. Use straight from the container and do not dilute.
STAMPSEAL 30 is recommended for use over:
- Plain, colored, and precast concrete where a clear bright finish is desired
- Exposed aggregate concrete
- Stamped concrete
- Acid stained surfaces
- Any colored concretes
- Cementitious overlayments